30 Hour Construction Safety Certification

InstructorBryan Dixon
TypeOnline Course
Price$189
Buy NowGroup Orders
(Returning Users Click Here)
30 hour OSHA construction Safety Training Certification

The OSHA 30 Hour Construction Industry Outreach Training course is a comprehensive safety program designed for anyone involved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 30-Hour Construction Outreach DOL course completion card within 4-6 weeks. The 30 Hour Construction Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.


 

Learning Objectives:
• Given OSHA historical events and current information, the student will be able to explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA.
• Locate OSHA Standards references applicable to specific hazardous conditions and practices (Introduction to OSHA Standards)
• Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
• Implement preventative measures for accidents in their workplace (Subpart D – Occupational health and Environmental Controls)
• Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards (Subpart E – Personal Protective Equipment)
• Understand the requirements for fire protection in the workplace (Subpart F – Fire Protection and Prevention)
• Identify types of rigging equipment used to protect employees (Subpart H – Rigging; Subpart N – Cranes and Rigging)
• Identify the critical health and safety hazards of welding and cutting in the construction industry (Subpart J – Welding and Cutting)
• Implement measures for protecting workers and equipment from dangerous falls (Subpart M – Fall Protection)
• Recognize the hazards associated with working in or around excavation sites (Subpart P – Excavations)
• Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q – Concrete and Masonry)
• Identify the precautions and hazards to protect workers using explosives or blasting agents (Subpart T – Demolition)
• Protect workers who perform jobs on or around stairways or ladders at worksites (Subpart X – Stairways and Ladders)
• List and describe the hazards and prevalence of confined spaces
• Identify common electrical hazards and related OSHA standards (Subpart K – Electrical Standards)
• Understand the importance of scaffolding for workers in elevated workplaces (Subpart L – Scaffolding)

Course Outline:
Orientation
Module 1: Introduction to OSHA and the OSH Act
Module 2: Recordkeeping
Module 3A: Basic Safety Orientation
Module 3B: General Safety and Health Provisions
Module 4: Health Hazards: Hazard Communication
Module 5: Health Hazards: Hazardous Materials
Module 6: Process Safety Management: (PSM)
Module 7: Personal Protective Equipment
Module 8: Fire Protection
Module 9: Materials Handling and Storage
Module 10: Hand and Power Tools
Module 11: Welding and Cutting
Module 12: Focus Four – Electrical Safety
Module 13: Focus Four – Struck-By and Caught in Between Hazards
Module 14: Focus Four – Fall Protection
Module 15: Cranes and Rigging
Module 16: Motor Vehicles
Module 17: Excavations
Module 18: Concrete and Masonry Construction
Module 19: Stairways and Ladders
Module 20: Confined Spaces
Module 21 Lead Safety in the Workplace
Module 22: Use of Explosives in the Workplace
Module 23: Scaffolds
Final Exam