Schomandl - Kathrein
CATV & Satellite Test Equipment

MSK-125 TV Signal Analyzer

The MSK 125 has been designed as a portable multiple standard selective signal meter for analogue TV, SAT and FM radio and for the digital standards DVB-C, DVB-S(2) and DVB-T/DVB-H.

The unit is equipped with a high-quality, transflective 5.7” TFT VGA resolution colour screen and a two-line, 16-digit LC display to show measured values. The calibrated spectrum function features a sweep rate of approx. two seconds. The built-in CI slot allows display of coded programs (1). The featured meter memory bank enables one to save up to 100 meter settings. Up to 100 measurement results can also be saved on an SD card and then exported via the USB port onto a PC.

(1) Decoding requires use of a corresponding CAM and valid access card (not included in the scope of delivery )

Features:

• Level measurement of analogue and digital TV signals (TV, Sat, FM, DVB-S(2), DVB-C, DVB-T, DVB-H (2k and 8k mode))
• Video display of analogue and digital TV signals in MPEG-2 (MPEG-4 in development)
• BER measurement and display of DVB signals
• MER display up to 32 dB
• 5.7” TFT colour display, transflective (640 x 480 pixels)
• Two-line, 16-digit LC display
• Spectrum display
• Sat finder function
• Acoustic signalling to facilitate antenna alignment
• Level display in dBμV or in dBmV
• Automatic measurement range selection
• Direct frequency and channel entry
• Measurement and display of remote feed current
• Audio carrier measurement (TV)
• NICAM audio carrier and BER measurement
• Audio control with built-in loudspeakers
• DiSEqCTM1.0 control signal
• SCR single-cable control commands
• Memory for signal meter settings
• Measurement value memory (SD card), with data readout via USB
• Data logger
• Software update interface
• Bi-directional SCART socket (CVBS, audio)
• Mains or battery operation
• Delivery scope: plug-in power supply unit, BNC test cable with adaptors
• Delivered in case

Download MSK-125 Data Sheet Here

MSK-115 Satellite Signal Meter

For optimal alignment of digital satellite systems in a handy, compact design. Display of signal strength and quality allowing optimal alignment of the antenna. In addition, the device features spectrum and constellation measurement for further monitoring. A default transponder and satellite list makes the meter easy to operate. Users can also set and save transponders. Software updates also allow the measuring instrument to be programmed for other client-specific satellite transponders. The measuring instrument is easy to operate and consequently the ideal tool for antenna installers during the installation of satellite systems.

Features:

• Measuring range: 950-2,150 MHz
• Input level range: 44-84 dBμV
• Input data rate: 1-45 MSymbol/s
• Level and BER measurement
• BER bar display either linear or logarithmic
• QPSK constellation diagram
• Display of the frequency spectrum with selectable span (60, 120, 240, 480, 960 and 1,200 MHz)
• Display of carrier-to-noise ratio (C/N)
• Display of optical signal quality and signal strength
• Acoustic signaling to facilitate antenna alignment
• Quick test for LNB current
• Level display either in dBμV or linear in 256 steps
• 64 transponders/32 satellites can be set
• Transponder can be set by the user
• Satellite parameters can be easily adjusted or changed through
• software updates
• Measurement results can be saved to the device
• Measurement results can be transferred to a PC through a USB cable
• Supply voltage through built-in battery
• Battery capacity is sufficient for over three hours of continuous operation
• Battery charging via external 12-V DC supply
• LNB supply voltage: 14/18 V, max. 500 mA
• Control signal: DiSEqCTM1.0, 22 kHz, SCR single-cable system control signals for ASTRA 19.2° and Hotbird 13.0°
• RF input: 75 Ω, F-type, with loop through output
• USB interface for software updates and data transmission
• Includes carry case, RF cable with F-type plug, 230 V/12 V power supply unit, 12 V car power charger cable, USB connection cable, instruction manual with safety notes
• Dimensions W x H x D (mm): 205 x 68 x 137
• Weight: Approx. 1.5 kg

MSK 115 21710020

Download MSK-115 Data Sheet Here