Alerts to Hazardous RF Exposures Meets FCC, OSHA, and WHO Guidlines Visual and Audio Alarms Wide Radio Frequency Range Rugged, Professional Construction Best Value Pricing

SafeOne™ is an effective and economical means to monitor the strength of electromagnetic (RF) fields from mobile phone towers, microwave ovens, radio and television installations, high frequency welders, and other common workplace RF sources between 10 and 10,000 MHz. The Personal RF Monitor is an important tool in complying with FCC, OSHA, and other safe workplace requirements.

SafeOne™ gives you audio and visual warning when the IEEE and ICNIRP limit is exceeded on your body. It immediately alerts you to high frequency radia­tion fields that could be a health hazard. SafeOne™ gives an approximate value of RF strength to help you determine how long you can stay in the radiation field.

Extremely convenient to wear and use, the SafeOne™ is the size of a cell phone and weighs under 3 ounces! It's smaller and much lighter than competing units!

Using Your SafeOne™

Wearing Your Monitor
The SafeOne™ should be worn on the belt with the supplied belt clip, or clipped to a harness in the optional carry pouch. Position the Personal Monitor clear of metallic objects, such as a tool pouch. The SafeOne™ should not be used with an RF protective suit.

Preparation for Use
To start using SafeOne™, simply unscrew the battery cover on the back and insert two AAA alkaline batteries, perform a functional test, and set desired alarm parameters.

No need to worry about the batteries - SafeOne™ batteries can last over 500 hours!

The monitor incorporates a self-test function to be used whenever the monitor is turned on.

Interpreting Your Monitor
The SafeOne™ uses a simple set of audible and visual alarms to alert you to dangerous radio frequency (RF) fields. Those alarms can be set for your convenience.

When SafeOne™ gives an alarm, it means that your RF exposure may be above FCC, OSHA, or ICNIRP limits. When this occurs, you should leave the area and proceed in accordance with your company’s RF safety plan or consult the appropriate workplace authority.

Setting Alarm / Function Features
SafeOne™ has 2 alarm levels and 3 alarm functions. All functions are controlled by pressing the SELECT pushbutton. When SELECT is pushed there is audio and visual feedback.

The World Health Organization hasestablished health hazard limits that are accepted in most parts of the world as standards. In the United States, these are standards of the FCC and OSHA. The limits are divided into two levels, one for “General Public” use and one for persons trained to work in high frequency radiation areas, referred to as “Occupational”.

Your RF monitor can be set to these two alarm levels. The lower "Public" level is automatically chosen when SafeOne™ is turned on. To choose "Occupational", press and hold the SELECT pushbutton for more than 5 seconds. The unit will respond with 10 long or 10 short beeps. The chosen level is indicated by a lighted bar.

By pushing the SELECT button momentarily, the 3 different alarm functions can be chosen:

• Normal (one beep): In this position the SafeOne™ will give both audible and visual warning, when the chosen alarm limit is exceeded.
• Timer (two beeps): SafeOne™ will only give visual warning, when the chosen alarm limit is exceeded. After approximately 5 minutes SafeOne™ will beep and return to normal position.
• Silent (three beeps): SafeOne™ will only give visual warning when the chosen alarm limit is exceeded.

Maintaining Your Monitor
No routine maintenance is needed to keep your SafeOne™ in good order! Just take common sense measures to keep it clean, dry, and secure.

Calibration services are available.

   Order Your SafeOne™ Now
Special Introductory Price

     Only $675 US*
            (Quantity Discounts Available)

 
Accepted

Order Here

or contact
Jerry Brown (USA & Worldwide)
Javier Castillo (Latin America)
252-757-0279 or  800-522-4464

*Shipping, duties, and taxes are extra as required by destination.