This product is no longer available.
The MSK-115 satellite signal meter allows for optimal alignment of digital satellite systems in a handy, compact design. The audible and visual display of signal strength and quality allow for optimal alignment of the antenna. In addition, the device features spectrum and constellation measurement for further monitoring. A default transponder and satellite list makes the meter easy to operate. Users can also set and save transponders. Results can be stored in the satellite signal meter and transmitted to a PC with the included USB cable. Also using the cable, current satellite lists can be transferred from a PC to the meter. Software updates also allow the measuring instrument to be programmed for other client-specific satellite transponders. The satellite signal meter is either linear or in dBmV in 256 steps, BER can be displayed in linear or logarithmic. The control signals 14V/18V, 22kHz and DiSEqC support. The measuring instrument is easy to operate and consequently the ideal tool for antenna installers during the installation of satellite systems. The built-in rechargeable battery allows for more than 3 hours of continuous operation.
MSK-115 Satellite Signal Meter
Features of the MSK-115 Satellite Signal Meter:
-
Measuring range: 950-2,150 MHz
-
Input level range: 44-84 dBμV
-
Input data rate: 1-45 MSymbol/s
-
Level and BER measurement
-
BER bar display either linear or logarithmic
-
QPSK constellation diagram
-
Display of the frequency spectrum with selectable span (60, 120, 240, 480, 960 and 1,200 MHz)
-
Display of carrier-to-noise ratio (C/N)
-
Display of optical signal quality and signal strength
-
Acoustic signaling to facilitate antenna alignment
-
Quick test for LNB current
-
Level display either in dBμV or linear in 256 steps
-
64 transponders/32 satellites can be set
-
Transponder can be set by the user
-
Satellite parameters can be easily adjusted or changed through
-
software updates
-
Measurement results can be saved to the device
-
Measurement results can be transferred to a PC through a USB cable
-
Supply voltage through built-in battery
-
Battery capacity is sufficient for over three hours of continuous operation
-
Battery charging via external 12-V DC supply
-
LNB supply voltage: 14/18 V, max. 500 mA
-
Control signal: DiSEqCTM1.0, 22 kHz, SCR single-cable system control signals for ASTRA 19.2° and Hotbird 13.0°
-
RF input: 75 Ω, F-type, with loop through output
-
USB interface for software updates and data transmission
-
Includes carry case, RF cable with F-type plug, 230 V/12 V power supply unit, 12 V car power charger cable, USB connection cable, instruction manual with safety notes
-
Dimensions W x H x D (mm): 205 x 68 x 137
-
Weight: Approx. 1.5 kg
|
|
|
|
FREE Accessories for your MSK-115 Satellite Signal Meter:
|
This product is no longer available.
For orders, quotes, or tech assistance,
use our
Or
Contact Byron Johnson, byron.johnson@lbagroup.com
Call 800-522-4464 or 252-757-0279
Accepted
