RF Sample Loops

This series of sampling loops has been designed primarily for installation on standard broadcast towers wherever it is desired to monitor currents and/or phases. These loops are mechanically rugged and suitable for direct installation on a tower leg, with all mounting hardware provided. Availability is immediate.

The Model SL-10 is compact and approximately 18 inches square. The loop is fully insulated. However, it is provided with a pigtail for bonding to the tower at the installation location, should the installer elect a non-insulated mode of operation. The loop is furnished in a non-shielded configuration, although a shielded loop can be furnished on special order (model #SL-10S). Output from the loop is via a SO-239 UHF connector. The SL-10 is entirely sealed and encapsulated for stability and weather protection. Principal applications on this loop are in detuning and sectionalized tower monitoring applications, and for non-directional antenna remote current monitoring.

The model SL-20 is of moderate size, approximately four feet long and two feet wide. This is a general purpose RF pickup loop for all medium frequency applications. The SL-20 loop is entirely insulated. However, a pigtail is provided for bonding directly to the tower should the installer wish a non-insulated mode of operation. Although of single turn construction, a convenient junction box permits the selection of two different loop sensitivities, and configuration either to shielded or unshielded operation. Connection to the loop is by SO-239 UHF connector. The SL-20 loop is designed to mount on any standard broadcast tower with a leg diameter of three inches or less. All mounting hardware is furnished. The unit is entirely sealed and encapsulated for stability and protection against weather. This SL-20 loop meets all FCC requirements for approved antenna monitor sample systems.

Return to Medium Wave RF Components

For a quotation or technical assistance, use our

or contact Javier Castillo via email
or at 800-522-4464 or 252-757-0279

• Home - LBA
  • LBA Technology Home
  • Lawrence Behr Associates Home
• RF & Wireless Services
  • RF Compliance
    • RF Hazards Audits
    • AM Detuning & Protection
    • Engineering ToolBox
    • Site Intermodulation
    • RF Safety Training
    • RF Shielding Services
  • RF Engineering
    • AM - Cellular Colocation
    • In Building Wireless and Distributed Antenna Systems
    • RF Interference
    • Wireless Network RF Design
    • Broadcast Engineering Services & Consulting
    • Wireless Network RF Design Services
  • Turnkey System Design & Install
  • International Telecom Consultancy
• RF, Video & Test Products
  • Antenna Systems
  • Test Equipment
    • LBA Faraday Cages
    • Schomandl-Kathrein Products
    • Impedance Analyzer
  • EMI / RF Shielding Fabrics & Paint
  • Timing & Frequency Systems
  • Tactical & Navigation Systems
    • Tactical Mobile Towers
    • NAVTEX, DGPS, & GMDSS Systems
  • Lightning Protection Systems
• Blogs
  • "As the Antenna Turns" - products and services
  • "Hear No RF Evil" - news and commentary
  • "Antena LBA Hispano" - en Español
• Learning Center
  • App Notes, White Papers & More
  • Links and Resources
• About LBA
  • Our Location
  • LBA Information
    • Who We Are
    • Key Staff
    • LBA Human Resources
    • Minority Business Certs
    • Strategic Partnering
• Press Room
• Financing Options
• LBA En Español
• Sitemap
• Contact Us!

 

3400 Tupper Drive
Greenville, North Carolina 27834
800-522-4464 / 252-757-0279 / Fax 252-752-9155
Email:

Copyright 2009. LBA Group, Inc. All Rights Reserved.