CAMI^™

LBA Technology’s CAMI™ series of new-concept broadband medium-power isolators permit other antennas to be mounted on “hot” AM towers.  These systems offer a simple, economical solution to take full advantage of existing vertical real estate.

CAMI systems are specifically targeted to isolate single auxiliary broadcast coaxial cables for STL’s, FM translators, low power FM and television translators.  Unlike commonly used isocouplers, one CAMI fits all of these applications.  They also have the advantage of passing AC or DC current to tower top amplifiers and are more resistant to weather and lightning.

With pending FCC approval of translators for AM daytime stations, CAMI will provide a simple, cost effective way to mount the translator antenna on
existing AM towers without major changes to the
transmitting system.

Typical CAMI System Specifications:

·  Broadband transmission frequency: DC - 2500MHz

·  Broadband impedance: 50 ohms, VSWR < 1.2:1

·  Power (averages): 1500W @ 100 MHz, 500W @ 1000 MHZ, 250W @ 2500 MHZ

·  Insertion loss: 1.2 dB @ 100 MHz, 2.6 dB @ 1000 MHz, 4.0 dB @ 2500 MHz

·  DC power passing

·  AM isolation frequency range: 500 - 2500 kHz

·  AM working voltage: 3.5 kV peak (typical 10kW into 1/4 wave tower, other ratings on request)

·  Lightweight, fast installation

For a quotation or technical assistance, use our

or contact Javier Castillo  via email or call 252-757-0279

3400 Tupper Drive (27834), P.O. Box 8026
Greenville, North Carolina 27835
800-522-4464 / 252-757-0279 / Fax 252-752-9155
Email:

Copyright 2009. LBA Group, Inc. All Rights Reserved.