|
|
|
SafeOne™ |
|
SafeOne™ personal RF safety monitors are an effective and economical means to monitor the strength of electromagnetic (RF) fields from mobile phone towers, microwave ovens, radio and television installations, high frequency welders, and other common workplace RF sources between 10 and 10,000 MHz. The Personal RF Monitor is essential RF safety equipment in complying with FCC, OSHA, and other safe workplace requirements. SafeOne™ personal RF safety monitors give you audio and visual warning when the IEEE and ICNIRP limit is exceeded on your body. It immediately alerts you to high frequency radiation fields that could be a health hazard. SafeOne™ gives an approximate value of RF strength to help you determine how long you can stay in the radiation field. Extremely convenient to wear and use, the SafeOne™ personal RF safety monitor is the size of a cell phone and weighs under 3 ounces! It's smaller and much lighter than competing units! Using Your SafeOne™ Wearing Your Monitor Preparation for Use No need to worry about the batteries - the SafeOne™ pocket RF monitor's batteries can last over 500 days! The monitor incorporates a self-test function to be used whenever the monitor is turned on. Interpreting Your Monitor When SafeOne™ RF radiation monitors give an alarm, it means that your RF exposure may be above FCC, OSHA, or ICNIRP limits. When this occurs, you should leave the area and proceed in accordance with your company’s RF safety plan or consult the appropriate workplace authority. Setting Alarm / Function Features The World Health Organization has established health hazard limits that are accepted in most parts of the world as standards. In the United States, these are standards of the FCC and OSHA. The radiofrequency exposure, Maximum Permissable Exposure (MPE) limits are divided into two levels, one for “General Public” use and one for persons trained to work in high frequency radiation areas, referred to as “Occupational”. Your RF monitor can be set to these two alarm levels. The lower "Public" level is automatically chosen when SafeOne™ personal RF protection is turned on. To choose "Occupational", press and hold the SELECT pushbutton for more than 5 seconds. The unit will respond with 10 long or 10 short beeps. The chosen level is indicated by a lighted bar. By pushing the SELECT button momentarily, the 3 different RF safety alarm functions can be chosen:
Maintaining Your Monitor
Order Your SafeOne™ Now
or contact *No charge for ground shipment within the continental United States. Expedited shipping and handling will be charged extra. Duties and taxes are extra as required by destination. Offered for professional use only.
|
|||
|
3400 Tupper Drive (27834),
P.O. Box 8026 Copyright 2007. LBA Group, Inc. All Rights Reserved. |